KISS SideKick Rebreather

rEvo III Expedition HCCR with DiveCan rMs Petrel Controller and rEvo Dream (Full rMs)

rEvo III Expedition HCCR with DiveCan rMs Petrel Controller and rEvo Dream (Full rMs)

$8,999.00

Features
The rEvo III Expedition HCCR is a Hybrid Electronically operated closed circuit rebreather based on electronics and the CMF principle: (constant mass flow). During diving a constant flow of oxygen bleeds into the breathing loop of the rebreather. The flow rate is high enough to provide a diver in rest with a life sustaining breathable oxygen flow. The flow rate can be adjusted to the individual metabolic rate of the diver. But it is kept low enough to be safe. During the dive the Petrel controls and monitors their PPO2 with the help of the LED indication of the HUD and their handsets: when needed they can manually add oxygen through the oxygen addition valve to maintain the desired PPO2. It must be clear that the rEvo III EXPEDITION mCCR is not an electronically controlled rebreather: there is no computer which decides when oxygen has to be added: that is the role of the diver. If they do not monitor and adjust the PPO2 regularly, this will lead to hypoxia, unconsciousness and ultimately, death. (*with the optional hCCR electronics, the rEvo becomes a fully electronically controlled rebreather)

Easy to setup, easy to transport, easy to dive and easy to maintain!

The rEvo III EXPEDITION HCCR has been designed with one clear purpose in mind: simplicity in setup, simplicity in use and simplicity in maintenance. The user has access to all rebreather parts. Oxygen cells, ADV, orifice, scrubber canisters, moisture pads can be reached by demounting the main cover, removing one screw. This unique design means that the rebreather has only 4 connections with o-rings used by the diver: 2 for the breathing hoses and 2 for the main cover: the scrubber lid (each with a double o-ring). The risk of leaking, wrong connections, wrong assembly and forgotten o-rings has thus been reduced to a minimum!

Weight of the rEvo ready to dive (full 3 litre heavy steel cylinders, packed canister, stainless steel housing, BCD, backplate = 31 kg (including 2.7 kg absorbent).
Empty weight (without absorbent and cylinders) = 17.5kg.
Size: with steel 3litre cylinders: 64 x 40 x 18 (cm).
Constant oxygen flow by means of an orifice, manual oxygen and diluent addition, automatic diluent valve.
Two completely independent programmable PPO2 monitors with LED indication on two HUDs (rEvodream P5).
Securely attached mouthpiece.
Ergonomically integrated backplate to create a minimal static WOB (work of breathing).

JJCCR Rebreather

$9,500.00 $8,995.00

The JJ-CCR rebreather has been called ‘the 4 x 4 of the rebreather community’ which in many ways is the perfect description as it is built for all types of terrain and can be adapted to handle the most demanding adventures. The JJ-CCR demands a skilled diver fully aware of the pros and cons of technical rebreathers and was never intended for the sports diving market, it was engineered by professional wreck divers who needed a solid tool to do the job in the deep, dark, and cold waters of the Baltic Sea. The environment the JJ-CCR was built for demands a rebreather that is simple and sturdy in regards to handling and ruggedness, independent of the situation and operational environment. All of the components of the JJ-CCR have been carefully selected and are there for a reason! Each detail has a purpose and every solution can be justified. The versatility of the rebreather makes it adaptable for whatever dive you are planning.

The philosophy behind the JJ-CCR is to keep it simple with robust construction and minimalistic work detail making it easy to handle before, during and after the dive. The main assembly consists of an aluminum housing and a stainless steel stand where all the components such as counter lungs, wings, and harness are attached. This provides the user with comfort on land when donning the rebreather as well as in water when diving it. All hoses and gas paths are made for optimal performance both in water and for maintenance purposes. The JJ-CCR is equipped with state of the art electronics and is ready to fly right out of the box. Fill it with sofnolime and serious adventures are about to begin.

FEATURES
• Highly robust aluminum housing to which it is possible to secure up to 4 diving tanks (2-12L) using conventional tank belts.
• User repackable soda lime canister (axial).
• Heavy duty stand
• Integrated handle
• Back-mounted (over the shoulder) counter lungs
• Redundant power supply: One battery for the controller, one battery for the HUD and two parallel batteries for the solenoid. None of the batteries are integrated into the loop
• Integrated ADV (Automatic Diluent Valve)
• DSV (Dive Surface Valve)
• Valve for manual oxygen supply with the option to feed in external gases
• Valve for manual diluent supply with the option to feed in external gases (Standard on CE edition, Optional for Intl. edition)
• Independent digital HUD (Head Up Display) with real time display of PPO2 for all three oxygen sensors
• Reliable controller with an integrated Shearwater multi-gas decompression computer

KISS Sidewinder Sidemount Rebreather

$8,885.00

Sidemount rebreathers have historically taken on the form factor of a sidemount open circuit tank. While this design attempts to mimic the streamlining of a sidemount cylinder, often hydrostatic work of breathing issues result if the unit isn't perfectly rigged and mounted. Even when it is, the work of breathing is only optimal when in certain diving positions.

The KISS Sidewinder rebreather solves these issues by splitting the canisters on the diver's left and right sides. These are connected by one 8-liter counterlung, which spans across the diver's back. The result is a super clean, streamlined configuration which provides excellent work of breathing in most diving orientations.

Our standard configuration comes the following way:

Primary PO2 Monitor is a Hardwired Shearwater Petrel

Secondary Display is a Nerd 2 with 4pin connector

3X Oxygen Sensors with Molex style connector

Hollis BOV

KISS dual button - bottom loading MAV (for side mount)

Syntactic foam insulation

KISS Sidewinder Specs:

Depth rating: 300 fsw / 91 msw
Scrubber Type: bi-axial design
Scrubber Capacity: 4.4 lbs. with Molecular 797 Grade (812 Mesh) Sofnolime.
Weight: Complete with BOV, harness and wing (minus tank and sorb) 21-lbs. / 9.5 kg.

The KISS Sidewinder does not include:

Since most sidemount divers already own a sidemount harness they like, the Sidewinder does not include a sidemount harness or wing.
Oxygen tank
Pressure gauges
Diluent/Bailout regulator(s) and tanks

rEvo III Expedition HCCR with DiveCan Petrel Controller and rEvo Dream (No RMS)

rEvo III Expedition HCCR with DiveCan Petrel Controller and rEvo Dream (No RMS)

$7,899.00

Features
The rEvo III Expedition HCCR is a Hybrid Electronically operated closed circuit rebreather based on electronics and the CMF principle: (constant mass flow). During diving a constant flow of oxygen bleeds into the breathing loop of the rebreather. The flow rate is high enough to provide a diver in rest with a life sustaining breathable oxygen flow. The flow rate can be adjusted to the individual metabolic rate of the diver. But it is kept low enough to be safe. During the dive the Petrel controls and monitors their PPO2 with the help of the LED indication of the HUD and their handsets: when needed they can manually add oxygen through the oxygen addition valve to maintain the desired PPO2. It must be clear that the rEvo III EXPEDITION mCCR is not an electronically controlled rebreather: there is no computer which decides when oxygen has to be added: that is the role of the diver. If they do not monitor and adjust the PPO2 regularly, this will lead to hypoxia, unconsciousness and ultimately, death. (*with the optional hCCR electronics, the rEvo becomes a fully electronically controlled rebreather)

Easy to setup, easy to transport, easy to dive and easy to maintain!

The rEvo III EXPEDITION HCCR has been designed with one clear purpose in mind: simplicity in setup, simplicity in use and simplicity in maintenance. The user has access to all rebreather parts. Oxygen cells, ADV, orifice, scrubber canisters, moisture pads can be reached by demounting the main cover, removing one screw. This unique design means that the rebreather has only 4 connections with o-rings used by the diver: 2 for the breathing hoses and 2 for the main cover: the scrubber lid (each with a double o-ring). The risk of leaking, wrong connections, wrong assembly and forgotten o-rings has thus been reduced to a minimum!

Weight of the rEvo ready to dive (full 3 litre heavy steel cylinders, packed canister, stainless steel housing, BCD, backplate = 31 kg (including 2.7 kg absorbent).
Empty weight (without absorbent and cylinders) = 17.5kg.
Size: with steel 3litre cylinders: 64 x 40 x 18 (cm).
Constant oxygen flow by means of an orifice, manual oxygen and diluent addition, automatic diluent valve.
Two completely independent programmable PPO2 monitors with LED indication on two HUDs (rEvodream P5).
Securely attached mouthpiece.
Ergonomically integrated backplate to create a minimal static WOB (work of breathing).

rEvo III Expedition MCCR with Petrel Monitor and rEvo Dream

rEvo III Expedition MCCR with Petrel Monitor and rEvo Dream

$7,460.00

Features
The rEvo III Expedition mCCR is a manually operated closed circuit rebreather based on the CMF principle: (constant mass flow). During diving a constant flow of oxygen bleeds into the breathing loop of the rebreather. The flow rate is high enough to provide a diver in rest with a life sustaining breathable oxygen flow. The flow rate can be adjusted to the individual metabolic rate of the diver. But it is kept low enough to be safe. During the dive the diver controls and monitors their PPO2 with the help of the LED indication of the HUD and their handsets: when needed they can manually add oxygen through the oxygen addition valve to maintain the desired PPO2. It must be clear that the rEvo III EXPEDITION mCCR is not an electronically controlled rebreather: there is no computer which decides when oxygen has to be added: that is the role of the diver. If they do not monitor and adjust the PPO2 regularly, this will lead to hypoxia, unconsciousness and ultimately, death. (*with the optional hCCR electronics, the rEvo becomes a fully electronically controlled rebreather)

Easy to setup, easy to transport, easy to dive and easy to maintain!

The rEvo III EXPEDITION mCCR has been designed with one clear purpose in mind: simplicity in setup, simplicity in use and simplicity in maintenance. The user has access to all rebreather parts. Oxygen cells, ADV, orifice, scrubber canisters, moisture pads can be reached by demounting the main cover, removing one screw. This unique design means that the rebreather has only 4 connections with o-rings used by the diver: 2 for the breathing hoses and 2 for the main cover: the scrubber lid (each with a double o-ring). The risk of leaking, wrong connections, wrong assembly and forgotten o-rings has thus been reduced to a minimum!

Weight of the rEvo ready to dive (full 3 litre heavy steel cylinders, packed canister, stainless steel housing, BCD, backplate = 31 kg (including 2.7 kg absorbent).
Empty weight (without absorbent and cylinders) = 17.5kg.
Size: with steel 3litre cylinders: 64 x 40 x 18 (cm).
Constant oxygen flow by means of an orifice, manual oxygen and diluent addition, automatic diluent valve.
Two completely independent programmable PPO2 monitors with LED indication on two HUDs (rEvodream P5).
Securely attached mouthpiece.
Ergonomically integrated backplate to create a minimal static WOB (work of breathing).